It’s that time again.

brownie-trio

Shitty, shitty, shitty.

The Shitty Camera Challenge is happening soon. It’ll be a little different than last year, I think, as it’s being touted as the “Quarantine Special” this time ’round.

It lasts from June 1 to August 31, 2020. Not exactly clear about when to post, but I’m sure that’ll all get figured out as time progresses.

I looked on eBay to see if I could find some camera that’d be adequately awful to use, but found zero inspiration. I was about ready to throw in the towel.

Larry found it in the garage when they moved into the house…

Fiddlin’ in the studio I came a cross a handful of old 120 spools, mostly plastic, but one of them was metal. It has the words “KODAK FILM” embossed on both ends. Pretty cool.

It reminded me that I have a 50th Anniversary Kodak Brownie that a neighbor in the old ‘hood gave me. That old thing had a roll of Verichrome Pan in it, which I developed using D76. That’s where the spool came from.

wp-brownie

Of the three pictures that turned out (see top of post), two looked to be from the seventies and one looked earlier, maybe late fifties or early sixties.

Larry found it in the garage when they moved into the house, held onto it until late 2007, when he gave the camera to me.

I also have two rolls of expired film to use, a March 1968 expired roll of Verichrome Pan plus a June 2008 expired roll of Plus-X. The camera shoots ~6×9 so I’ll get 8 shots per roll.

 I’ll probably rig something up so I can compose and shoot horizontally…

Today I dusted it off and cleaned the, uh, viewfinder. It’s really not much of a viewfinder, honestly. I’ll probably rig something up so I can compose and shoot horizontally… you know, landscape.

The little red window that’s supposed to show the picture numbers has faded to a fairly transparent orange-ish yellow, so I made a little flap out of a piece of gaffers to cover-up between advancing shots. Should help.

I think it’ll do. Funky, fun, and free.

Rusty shutters #36.

0000-pinholaroid-35mm-f140

Pinholaroid.

September 2008.

Modified Polaroid Colorpack II – 35mm @ ƒ/140. No batteries required!

After removing the lens and shutter, I lopped off a good portion the front, then fitted a neatly cut and trimmed piece of black ABS to cover the resulting hole. This made for a shorter distance to the film plane and a wide angle of view.

I measured for center, then drilled a 4/16″ hole through the front plate. The shutter and shutter-stops came next. I measured for the shutter location, drilled a pilot hole, then attached the shutter with a small brass screw, washer and nut. The stops were super-glued. Super-simple operation.

I cut a 3/4″ square piece of soda can and used a very small sewing needle and a sheet of binder paper folded up a bit and placed beneath it to punch the hole through the aluminum, slowly, sanding the back of the puncture to smooth it out. The pinhole is attached to the inside of the camera with gaffer tape.

I turned the camera upside down and added a viewfinder, using a simple 200 degree peep-hole from Home Depot. I used ABS for the viewfinder support, drilled a hole to accommodate the peep-hole and super-glued the bracket to the camera body. The viewfinder placement is dead center above the pinhole.

Having removed the original Colorpack II viewfinder – which is now on the bottom of the camera – I cut out 6 of pieces of ABS that mimicked the shape of the Manfrotto tripod mount I use, each slightly smaller than the next. I glued them together, then drilled a hole for a 1/4-20 sleeve to attach the Manfrotto mount.

In a stroke of good luck, the pattern on the ABS was a close match to that of the Colorpack II. I finished off the Pinholaroid by painting all the exposed ABS satin black.

A fun little project. I even have a decent stash of Fuji pack-film to use with this camera.

It’s not cheating, is it?

square-black-frame.jpg

A $40 experiment.

One of my fave shots from Spring 2020 ‘Roid Week was taken with a Pentax Q10 mirrorless camera and using the Polaroid Lab, printed on Polaroid I-Type instant black and white film.

I noticed a more than a few peeps doing something similar. Very interesting work and great results.

I spotted some black-frame Instax Square film on Amazon. $10 for a box of ten shots – I bought four boxes.

I’ll be taking square black and white shots with my LX100, load them onto the SQ10s miniSD card and print them out in monochrome.

That’ll give me 40 shots to edit down to 12 through between now and the Fall.

‘Roid Week Recap.

roidweek-2020-post.jpg

At week’s end.

Here are a number of my absolute faves from 6 days of Spring 2020 ‘Roid Week.

There was tons of great work, so many talented shooters. Check out my Flickr gallery of all 171 personal faves.

The Flickr pool. All 1,284 photos.

IG tags > #roidweek2020 #polaroidweek2020

*Note to self…  Fall ‘Roid Week will happen October 18 – 23, 2020.