Toning.

First experiments.

Yesterday I fiddled with toning cyanotype. First experiments were fairly positive, with two, maybe three out of eight working out.

I used green tea.

Wet the print, then a bath in a tray with 2L water mixed with a spoonful of washing soda. The bleaching was quick and noticeable.

Then in a tray with green tea for about three minutes.

Then into a tray with water/H202 mix, really just a rinse.

Agitate at each step.

There was still a lot of blue showing, so I dunked and agitated it in the washing soda again and then back in the tea and it started to turn brown.

Last, a clear water rinse in the utility sink in our garage, then the print was hung to dry.

I tried a few different variations of the above, using prints from the past that didn’t make the cut. I have a whole folder of them. Success with cyanotype has not come easy.

The toning saved a few of those rejects.

Cool.

Something new(ish).

Blue boy.

Back in February I attended a Cyanotype workshop at a local art center and by May I’d assembled the chemicals and miscellaneous tools and materials needed to get started.

I’ve made cyanos using bits of nature, cyanos of original geometric designs, and cyanos using digital negatives created from photos – old and new – picked from the archives.

These are the latest four photo-cyanos…

B’s reel
6″ x 6″ on 9″ x 12″ Canson Bristol board
Original image

Ol’ Glory
6″ x 6″ on 9″ x 12″ Canson Bristol board
Original image

ARS
6″ x 6″ on 9″ x 12″ Canson Bristol board
Original image

Whirlwind
6″ x 6″ on 9″ x 12″ Canson Bristol board
Original image

Wagon wheel.

Cyanotype on Canson Bristol board.

This is a digital shot I made a coupla’ weeks back using my old Pentax 330GS.

The image was converted to black and white using Photoshop, where I also increased the contrast a bit, and inverted it to make a negative. I then opened the file in Illustrator, scaled it to around 8″ x 10″, then printed the image on acetate using our old Samsung laser printer.

It’s about an 8 minute exposure.