Party time.

It’s been a hell of a year.

The last photographic event/outing I participated in was the 2020 FP4+ Party, back around the first week of March, just before the lockdown.

That week I ventured out on my own, but ran into people, talked, and generally did what I always do when I go out shooting.

Since then I’ve stuck pretty close to home. My choice, for a number of reasons.

This year the FP4+ Party be my first event/outing. Fitting, really.

The 2021 Party schedule…

April 5th – 11th, shoot
April 12th – 18th, develop
April 19th – 25th, post

By the time April 5th rolls around, I’ll have had my second Pfizer jab. I’ll still observe CDC protocols, but I think it’ll be okay to get out shooting if I limit my interactions with people.

It’ll be fun to shoot and develop a handful of 120 rolls. It’s been a while, I’ll probably have to mix up a fresh batch of D76.

A little less than a month to go.

Side note: I’m gonna hafta miss the GTX Photo Fest this time around. Bad timing, as my second jab comes a few days after. 2022 for sure.

The party’s over.

 

March 2020 FP4 Party: A few final observations.

It was quite the experience.

I enjoyed every aspect.

It got me out with film cameras, new and old.

I tried a film new to me.

My skill at loading 35mm and 120 film on the Paterson reels continues to improve.

Developing with D76 yielded excellent results.

I found a groove every week.

Looking through Twitter at the #fp4party hashtag for the past 7 days to see what other party-goers posted was a treat.

Followed some new folks, gained a few followers on Twitter, IG, and Flickr.

Thanks to the FP4 Party hosts.

Here are my 7 submissions, last-to-first…

The gate
Georgetown, TX
Saturday, March 7, 2020
ONDU 6×12 Multiformat pinhole, FP4+ 120, D76
FP4 Party Post Week, Day 7

Sprinkles
Georgetown, TX
Thursday, March 5, 2020
Smena 8M, FP4+ 35mm, D76
FP4 Party Post Week, Day 6

Used cars
Thorndale, TX
Friday, March 6, 2020
Hasselblad 500c/m, FP4+ 120, D76
FP4 Party Post Week, Day 5

Bridge to nowhere
Georgetown, TX
Thursday, March 5, 2020
Smena 8M, FP4+ 35mm, D76
FP4 Party Post Week, Day 4

The bucket
Round Rock, TX
Monday, March 2, 2020
Hasselblad 500c/m, FP4+ 120, D76
FP4 Party Post Week, Day 3

9 right
Georgetown, TX
Saturday, March 7, 2020
Smena 8M, FP4+ 35mm, D76
FP4 Party Post Week, Day 2

Mid-century modern emptiness
Taylor, TX
Friday March 6, 2020
ONDU 6×12 Multiformat pinhole, FP4+ 120, D76
FP4 Party Post Week, Day 1

FP4 Plus Party, Dev Week part one.

Smena 8M + 35mm.

This was my first time out with the Smena. It’s a quirky little Russian camera. Plastic. Toy-like, if not for the fact that it has apertures and shutter speeds and a cocking shutter.

I put gaffer tape over the seams on the lid to the film compartment just in case of light leaks. The viewfinder is pretty close to useless.

Results…
– 27 shots out of a 24 shot roll. Cool.
– 1 accidental double exposure.
– A few underexposed, a few overexposed.
– A handful of not perfectly exposed.
– Bunches not quite framed up the way I’d intended.

Can’t really tell about focus, but there are probably a few keepers, and I’ll know which to submit next week once I run them through the scanner.

Tomorrow.

This is an iPhone shot of the negs, cut and slipped into a negative preserver, placed on an LED light pad, inverted in Photoshop.

Today I’ll tackle the 120 film development.

Loaded.

Ready to party.

Three cameras, loaded and ready for FP4 Plus Party. Starting tomorrow.

I may add one more, the tiny Olympus Stylus Epic.

I have a few shots in mind, but mostly I’ll just try to get out as many days as I can and shoot up all these frames… 6 in the Ondu pinhole, 12 in the Hassy, 24 in the Smena 8M.

42 frames over 7 days. Averages out to 6 shots per day.

Should be interesting.

Party on!

Ilford FP4 Plus party.

This’ll be my first FP4 Plus Party, and in more ways than one – I’ve not used the film before.

The plan: 6 shots in the Ondu 6×12 Multiformat pinhole, 12 shots in the Hasselblad 500c/m, 24 shots in the Smena 8M.

I’ll need to mix up a fresh batch of D76.

It seems this is primarily a Twitter thing, but I’ll post a few scans here and eventually post a few faves on @dogbonesoup, too.

March 2-8: shoot week
March 9-15: dev/scan week
March 16-22: post week
March 23-29: lamentation week

Should be fun.